Welcome! This Sunbeam guide details setup, operation, and care for your Perfect Fleecy Electric Blanket. Enjoy personalized warmth with easy-to-follow instructions, ensuring safe and comfortable use.
Discover how to connect the power cord, select heat settings, and maintain your heated blanket for years of cozy enjoyment. Refer to page 12 for specific details.
Remember to always read the instruction booklet thoroughly before use, and prioritize electrical safety precautions. Sunbeam provides consumer care support in the US and Canada.
What’s Included in the Box
Your Sunbeam Electric Blanket package should contain the following items:
- One (1) Sunbeam Electric Blanket: Specifically, the Perfect Fleecy Electric Blanket, designed for optimal comfort and warmth.
- One (1) Detachable Control: This control unit allows you to adjust heat settings and utilize the auto-off timer. Ensure it’s firmly clicked into position on either side of the blanket.
- Instruction Manual: This comprehensive guide provides detailed instructions for safe operation, care, and troubleshooting. Please read thoroughly before use.
Important Note: Carefully inspect all components upon opening the box. If any items are missing or appear damaged, please contact Sunbeam Consumer Care immediately. Do not attempt to use a damaged blanket or control. Refer to the warranty information for contact details. The blanket should be visible at all times during use, and the cord should be looped loosely during storage to prevent damage.
Important Safety Instructions
Read all instructions carefully before using your Sunbeam Electric Blanket. This is an electrical appliance, and misuse can result in injury or damage. Never use with damaged cords or plugs. Do not operate if wet. Always ensure the blanket is fully visible during operation – do not cover the control.
Warning: Do not use with infants, incapacitated persons, or those insensitive to heat. Never use pins or clips on the blanket. Avoid folding or creasing the blanket excessively, especially during storage. Wrapping the cord around the controller can cause damage.
Electrical Safety: Disconnect from power when not in use and before washing. Refurbished parts may be used during repair. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities.
Setting Up Your Sunbeam Electric Blanket
Prepare for cozy warmth! Connect the power cord securely, identify control settings, and understand indicator lights for optimal performance. Refer to Figure 3 for guidance.
Connecting the Power Cord
Carefully locate the power cord connection point on your Sunbeam Electric Blanket control. Ensure the area is dry and free from obstructions before proceeding. Gently insert the power cord plug into the designated socket, applying even pressure until you hear a distinct ‘click’.
This ‘click’ confirms a secure connection, vital for safe and efficient operation. Do not force the plug if it doesn’t insert easily; double-check alignment. Once connected, visually inspect the connection to ensure it’s firmly in place.
If required, repeat the process on the other side of the blanket if your model has dual connections. Avoid using extension cords whenever possible; direct connection to a wall outlet is recommended. Always unplug the blanket before cleaning or storing.
Remember, a secure connection is paramount for enjoying the full benefits of your Sunbeam blanket.
Identifying the Control Settings
Your Sunbeam Electric Blanket control features intuitive settings for personalized comfort. Familiarize yourself with these before use. Typically, you’ll find a power button to turn the blanket on and off, and a series of heat level buttons – often ranging from low to high.
An auto-off timer control allows you to pre-set a duration, ensuring the blanket switches off automatically for safety and energy conservation. Indicator lights clearly display the selected heat setting and timer status.
Do not cover the control during operation, as this can cause overheating. The control may also feature a standby light, indicating power is connected but the blanket isn’t actively heating.
Refer to the diagram (Figure 3) for a visual guide to your specific control model. Understanding these settings unlocks the full potential of your Sunbeam blanket.
Understanding the Indicator Lights
The indicator lights on your Sunbeam Electric Blanket control provide crucial information about its status. A steady light typically indicates the blanket is actively heating at the selected level. Different colored lights may represent different heat settings – consult your model’s specific guide.
A flashing standby light signals the blanket is connected to power but not heating. If the standby light flashes three times followed by a pause, it indicates a potential issue – the blanket may be too hot or damaged.
In this case, turn the control off at the main power switch and then on again; If the flashing persists, contact Sunbeam Consumer Care. These lights ensure you’re always aware of the blanket’s operational state, promoting safe and efficient use.
Using Your Sunbeam Electric Blanket
Enjoy warmth! Select your desired heat setting, pre-heat for quick comfort, and utilize the auto-off timer for safe, personalized warmth. Adjust for optimal relaxation.
Selecting Heat Settings
Your Sunbeam electric blanket offers multiple heat settings to customize your comfort level. Begin with the lowest setting to gently warm up, then increase as needed to achieve your preferred temperature. Remember, individual preferences vary, so experiment to find what feels best for you.
The control allows you to easily cycle through the available heat levels. Typically, blankets feature settings ranging from low, medium, to high. Avoid immediately selecting the highest setting, especially during initial use, as it may become excessively warm.
Consider the ambient room temperature when choosing a setting. On colder nights, a higher setting may be necessary, while a lower setting might suffice in a warmer environment. Always prioritize comfort and avoid overheating.
Regularly adjust the heat setting throughout the night to maintain a consistent and comfortable temperature.
Pre-Heating the Blanket
Pre-heating your Sunbeam electric blanket ensures a wonderfully warm and inviting bed. For optimal comfort, activate the blanket approximately 30 minutes before bedtime. This allows the entire surface to reach a consistent and soothing temperature, eliminating any initial cold spots.
Start with a medium heat setting during pre-heating. Avoid using the highest setting for extended periods, as this could lead to overheating. Once you get into bed, you can adjust the setting to your desired comfort level.
Remember, the pre-heating process consumes more energy, so consider using the auto-off timer to conserve electricity. Always ensure the blanket is laid flat and free of any obstructions during pre-heating for even heat distribution.
Enjoy the luxury of a perfectly warmed bed with this simple and effective technique!
Using the Auto-Off Timer
The auto-off timer on your Sunbeam electric blanket is a convenient safety feature and energy-saving tool. It allows you to set a specific duration after which the blanket will automatically switch off, preventing overheating and reducing electricity consumption.
To activate the timer, simply press the timer button on the control until your desired time is displayed. Available settings typically range from 30 minutes to 10 hours. The blanket will maintain your selected heat setting until the timer expires.
Using the timer is particularly useful for pre-heating your bed; set it to turn off shortly before bedtime, ensuring a warm and cozy sleep without unnecessary energy waste. Always check the control panel to confirm the timer is set correctly.
Enjoy peace of mind knowing your blanket will automatically shut off!
Adjusting Temperature for Comfort
Personalizing your warmth is key with your Sunbeam electric blanket! The control allows you to easily adjust the temperature to your ideal comfort level; Begin with a lower setting and gradually increase it until you achieve the desired warmth.
Remember that factors like room temperature, bedding type, and personal preference will influence how warm you feel. Experiment with different settings to find what works best for you. Don’t hesitate to make small adjustments throughout the night for optimal comfort.
Avoid using excessively high heat settings for extended periods, as this can be uncomfortable and potentially unsafe. Always ensure all portions of the heated blanket are visible and not covered.
Enjoy a perfectly warm and relaxing experience!
Caring for Your Sunbeam Electric Blanket
Maintain warmth and longevity with proper care! Follow machine washing, drying, and storage instructions to ensure your Sunbeam blanket remains cozy and safe for years.
Machine Washing Instructions
Before washing, disconnect the power cord and ensure the control is detached from the electric blanket. Gently hand wash or use a machine on a delicate cycle with cold water and mild detergent. Do not use bleach or fabric softeners, as these can damage the heating wires and fabric.
Avoid high-speed or extra spin cycles during washing, as this can cause damage. Lay the Sunbeam blanket flat or hang to dry. Do not wring or twist the blanket, as this can also damage the internal components; Ensure the blanket is completely dry before storing or using it again.
Regular, gentle washing will help maintain the softness and warmth of your Perfect Fleecy Electric Blanket, extending its lifespan and ensuring continued comfort. Always refer to the full care instructions in the user manual for detailed guidance.
Drying Instructions
Crucially, never use a clothes dryer to dry your Sunbeam Electric Blanket. The heat can severely damage the internal heating wires and control unit, rendering the blanket unsafe and voiding the warranty. Avoid using a hairdryer or any other direct heat source for drying.
Instead, gently lay the blanket flat on a clean, dry surface, or hang it over a clothesline, ensuring it’s spread out evenly. Allow ample time for the blanket to air dry completely – this may take several hours depending on the humidity.
Do not place the blanket over a radiator or any other heat source. Ensure the blanket is thoroughly dry before storing or reusing it. Proper drying is essential for maintaining the blanket’s functionality and ensuring your safety.
Storage Instructions
Proper storage is vital for extending the life of your Sunbeam Electric Blanket. Before storing, ensure the blanket is completely cool and dry to prevent mildew or damage to the heating elements. Avoid creasing the blanket by placing heavy items on top of it during storage.
Ideally, store the blanket in its original packaging. If the original packaging isn’t available, use a breathable bag or container. Choose a cool, dry location, away from direct sunlight and extreme temperatures.
Avoid tightly folding or wrapping the blanket, as this can damage the internal wiring. Loop the power cord loosely to prevent damage. Refurbished parts may be used during repair, so careful storage helps minimize future issues.
Avoiding Cord Damage During Storage
Protecting the power cord is crucial for the longevity of your Sunbeam Electric Blanket. Wrapping the cord tightly around the controller can cause significant damage to the wires, potentially creating a safety hazard. Instead, loop the cord loosely when storing, avoiding any sharp bends or kinks.
Ensure the cord isn’t pinched or compressed by other stored items. Consider using a separate, soft pouch or wrapping the cord in a cloth for added protection. Inspect the cord regularly for any signs of wear and tear, such as fraying or cracking.
Proper cord management during storage prevents internal wire breakage and maintains the blanket’s functionality. A damaged cord can lead to malfunction and may require repair or replacement.
Troubleshooting Common Issues
Resolve problems quickly! If the standby light flashes three times, or the blanket doesn’t heat, consult this section for solutions and Sunbeam contact details.
Standby Light Flashing Three Times
What does it mean? A standby light flashing three times, followed by a pause, indicates a potential issue with your Sunbeam Electric Blanket. This typically signals that the blanket is overheating or may have sustained damage. It’s a safety feature designed to prevent hazards and protect the unit.
What to do: First, immediately turn the control off at the main power switch located on the rear of the control unit; This will completely disconnect power to the blanket. Wait a few minutes to allow the blanket to cool down. Then, switch the control back on.
If the problem persists: If the standby light continues to flash three times after resetting, do not continue using the blanket. This indicates a more serious problem. Contact Sunbeam Consumer Care for assistance. Attempting to use a malfunctioning blanket could be dangerous.
Important: Do not attempt to disassemble or repair the blanket yourself.
Blanket Not Heating
Troubleshooting a cold blanket: If your Sunbeam Electric Blanket isn’t producing heat, several factors could be at play. First, ensure the power cord is securely plugged into both the blanket’s control and a functioning wall outlet. Verify the outlet is receiving power by testing it with another device.
Check the control settings: Confirm the control is switched on and a heat setting is selected. Sometimes, the control may appear to be on, but is in standby mode. Try adjusting the heat level to see if that initiates warming.
If still no heat: If the blanket remains cold, the internal wiring may be damaged. Do not attempt to repair it yourself. Contact Sunbeam Consumer Care for assistance. Continuing to use a non-heating blanket won’t cause harm, but defeats its purpose.
Caution: Never use the blanket if the cord is frayed or damaged.
Control Not Responding
Addressing an unresponsive control: If your Sunbeam Electric Blanket’s control isn’t responding to button presses or adjustments, begin by verifying the power connection; Ensure the cord is firmly plugged into both the blanket and a working electrical outlet. Test the outlet with another device to confirm it’s providing power.
Resetting the control: Try turning the control off at the main power switch located on the rear of the unit. Wait a few moments, then switch it back on. This can sometimes reset the system and restore functionality.
Persistent issues: If the control remains unresponsive after resetting, there may be an internal fault. Do not attempt to disassemble or repair the control yourself. Contact Sunbeam Consumer Care for support and potential repair options.
Warning: Do not use the blanket if the control is malfunctioning.
Power Cord Issues
Addressing power cord concerns: Inspect the Sunbeam Electric Blanket’s power cord for any visible signs of damage, such as fraying, cuts, or exposed wires. A damaged cord presents a serious electrical hazard and should not be used.
Avoiding cord damage: When storing the blanket, avoid tightly wrapping the cord around the control, as this can cause internal damage over time. Loop it loosely instead. Do not crease the cord by placing heavy objects on top of it.
Safety first: If you detect any damage to the power cord, discontinue use immediately. Do not attempt to repair the cord yourself. Contact Sunbeam Consumer Care for assistance or to inquire about replacement options. Using a damaged cord could lead to electric shock or fire.
Warning: Never operate the blanket with a damaged power cord.
Safety Features & Warnings
Sunbeam blankets include overheat protection and visible heating wires. Always ensure all portions are visible; never cover the control, and prioritize electrical safety precautions.
Overheat Protection
Your Sunbeam electric blanket is equipped with advanced overheat protection as a crucial safety feature. This system continuously monitors the blanket’s temperature, automatically reducing heat or shutting off completely if an unsafe temperature is detected. If the standby light flashes three times, followed by a pause, it indicates the blanket may be overheating or potentially damaged.
In such instances, immediately turn the control off at the main power switch located on the rear of the control unit. Allow the blanket to cool completely before switching the control back on. If the flashing continues, do not use the blanket and contact Sunbeam Consumer Care for assistance. This feature is designed to prevent burns and ensure safe operation, but it’s vital to never ignore warning signals. Regularly inspect the blanket for any signs of damage that could compromise this safety mechanism.
Visible Heating Wires — Important Reminder
Please pay close attention to the heating wires within your Sunbeam electric blanket. All portions of the heated product must be visible at all times during use to ensure safe and effective operation. Avoid folding or creasing the blanket excessively, as this can damage the internal heating wires and compromise the blanket’s functionality.
Never place heavy objects on top of the blanket while it’s in use, as this can also cause damage to the wires. Ensure the heating wires are not pinched or compressed. When storing, allow the blanket to cool completely and avoid creating sharp creases. Loop the cord loosely to prevent damage during storage. Refurbished parts may be used during repair, but maintaining wire visibility is paramount for safety.
Electrical Safety Precautions
This Sunbeam electric blanket is an electrical appliance; exercise extreme caution. Never use the blanket if the power cord or control unit shows any signs of damage. Do not operate with a damaged cord, as this presents a serious electrical hazard. Avoid using extension cords, and if absolutely necessary, ensure it’s appropriately rated for the blanket’s wattage.
Always unplug the blanket from the power outlet when not in use, before washing, and during storage. Never immerse the control unit in water or any other liquid. Wrapping the cord around the controller may cause damage; loop it loosely instead. This appliance is not intended for use by individuals with reduced physical, sensory, or mental capabilities, or by children, without supervision. It is a potential hazard and can cause injury.
Warranty Information
Sunbeam offers a warranty on this electric blanket. For US support, contact Sunbeam Consumer Care at 800-892-7684. Canadian customers can also reach out for assistance.
Sunbeam Consumer Care Contact Details (US)
For assistance with your Sunbeam Electric Blanket in the United States, please do not hesitate to contact our dedicated Consumer Care team. We are committed to providing excellent support and resolving any questions or concerns you may have regarding your product’s operation, warranty, or care instructions.
You can reach Sunbeam Consumer Care by calling our toll-free number at 800-892-7684. Our knowledgeable representatives are available to assist you during regular business hours. Please have your model number and date of purchase readily available when you call, as this will help us expedite the process of addressing your needs.
We also encourage you to visit the official Sunbeam website for frequently asked questions, troubleshooting tips, and additional resources. Our online support portal offers a wealth of information to help you get the most out of your Perfect Fleecy Electric Blanket. We value your satisfaction and are here to ensure a warm and comfortable experience.
Sunbeam Consumer Care Contact Details (Canada)
Canadian Sunbeam Electric Blanket owners can access dedicated support through our Consumer Care team. We are dedicated to ensuring your complete satisfaction with your purchase and are readily available to address any questions or concerns regarding your blanket’s functionality, warranty details, or proper care procedures.
To connect with Sunbeam Consumer Care in Canada, please call us at 800-892-7684. Our friendly and knowledgeable representatives will be happy to assist you during standard business hours. Having your model number and proof of purchase available will help us efficiently resolve your inquiry.
Furthermore, we invite you to explore the official Sunbeam website for a comprehensive collection of FAQs, troubleshooting guides, and helpful resources. We are committed to providing a seamless and comfortable experience with your Perfect Fleecy Electric Blanket.
Guarantees Act (New Zealand)
For Sunbeam Electric Blanket purchasers in New Zealand, your purchase is protected under the Consumer Guarantees Act 1993. This legislation provides rights and remedies beyond those explicitly stated in our standard warranty, ensuring you receive a product fit for purpose and of acceptable quality.
The Guarantees Act automatically applies to your Sunbeam blanket, offering protection against defects in materials and workmanship. Should your blanket fail to meet these standards, you may be entitled to a repair, replacement, or refund.
To exercise your rights under the Guarantees Act, please retain your proof of purchase and contact our Sunbeam Consumer Care team. We are committed to upholding your consumer rights and resolving any issues promptly and efficiently, in accordance with New Zealand law.
Product Specifications
Sunbeam blankets are Made in China. The Perfect Fleecy Electric Blanket Details are fully outlined on page 12 of this user guide for your reference.
Made in China
Sunbeam electric blankets are manufactured in China, adhering to stringent quality control standards to ensure product reliability and performance. While assembled overseas, Sunbeam remains committed to delivering safe and effective heating solutions to consumers in the US, Canada, and New Zealand.
The manufacturing process incorporates durable materials and advanced heating technology. Sunbeam utilizes refurbished parts during repairs when appropriate, maintaining cost-effectiveness without compromising safety.
Consumers in New Zealand are covered by the Guarantees Act, providing additional assurance regarding product quality. Sunbeam prioritizes customer satisfaction and stands behind its products, offering dedicated consumer care support to address any concerns or inquiries. Detailed specifications, including materials and construction, can be found throughout this user guide.
Perfect Fleecy Electric Blanket Details (Page 12 Reference)
Page 12 of this guide provides specific details regarding the Perfect Fleecy Electric Blanket. It’s crucial to review this section for information on connecting the control, ensuring the heating wires are correctly positioned – as illustrated in Figure 3 – and confirming a secure click into place on both sides, if applicable.
Important: Never cover the control unit during operation. When laundering, avoid high-speed or extra spin cycles to protect the internal wiring. Do not use a hairdryer or heater for drying; allow air drying only.
Proper storage is vital. Loop the cord loosely to prevent damage and avoid creasing by placing items on top. Store in the original packaging in a cool, dry location. Always allow the blanket to cool completely before storing.